Customize Different Nonstandard Tungsten Carbide Screw Thread
Nozzles
Oil and gas down-hole drilling is an abrasive, punishing
environment for tools. The hole can quickly devour tooling that
slowly eats its way through the layers.
If you’re down-hole drilling, you know drill bits break, motors
seize, and critical wear components give out at the most critical
time. Wear is a primary cause of tool failure.
Tungsten carbide nozzle, made of high grade tungsten carbide, is
one of the spray nozzles. In another way saying, tungsten carbide
nozzles are usually used to sandblasting, therefore, users also
call them tungsten carbide sandblasting nozzles. The hardness
reached over HRA90 degree while the anti-bending degree reached
over 2300N/mm. On machining tungsten carbide spray nozzle, we do
the precision grinding and surface treatment to achieve Ra0.1 of
the bore roughness and the Ra0.025 of the R place of both ends.
There is a scientific curvature radius design in the both entrance.
This design can ensure a smooth transit of the thread. Due to the
overall materials processing, and no elevation in the bore, the
phenomenon of easy-bending and plugging has been improved comparing
with the ruby nozzle. tungsten carbide nozzle
We hold immense expertise in offering a precision-engineered array
of Tungsten Carbide Nozzles in different sizes, grades and
specifications. Our patrons widely appreciate our offered tungsten
nozzles as these are resistance against corrosion, have sturdy
construction and need less maintenance. Moreover, we provide these
tungsten nozzles as per the specifications detailed by patrons. To
ensure the presence of above named features in our offered a
tungsten nozzles, we make use of good quality raw material in the
manufacturing process.
For the varied requirements of our clients, we are engaged in
manufacturing, supplying, exporting and trading a wide range of
Tungsten Carbide Nozzles. These products are extremely rugged in
state and ensure longer functional life. All these products are
easy to install and needs low maintenance. These products are
available in different sizes and specifications.
Grades recommended
| Common Alloy Grades, Ghysical Mechanical Properties And Recommended
Application |
| Grade | WC% | Co/Ni % | Physical and mechanical properties | Grain size (μm) | Recommended application |
| Density (g/cm3) | TRS (N/mm2) | Hardness (HRA) |
| ZG01 | 100 | 0 | 15.3-15.5 | 1200 | 95.5 | 0.3 | Ultra-high hardness, high wear resistance, anti-corrosion, with
certain anti-destructive ability |
| ZG04X | 96 | 4 | 15.0-15.2 | 1600 | 92.8 | 0.8-1.0 | Suitable for drawing die, non-ferrous metal wire drawing and
wear-resistant parts |
| ZG06 | 94 | 6 | 14.8-15.1 | 2500 | 90.0 | 1.2 | Good abrasion resistance, good compression resistance, suitable for
wear-resistant parts that resist abrasion and high pressure. |
| ZG06X | 94 | 6 | 14.8-15.1 | 2400 | 91.5 | 1.0 | Superio wear resistance,good comprehensive properties,suitable for
making non-standard structure components with higher wear
resistance. |
| ZG06A | 94 | 6 | 14.8-15.1 | 2150 | 92.5 | 0.6-0.8 |
| ZG08 | 92 | 8 | 14.6-14.9 | 2700 | 89.0 | 1.2-1.6 | Good general performance, used for general wear parts, molds,
general tools, etc. |
| ZG10.2 | 90 | 10 | 14.3-14.6 | 3800 | 91.7 | 0.7 | Good general performance, suitable for casing and oil nozzle
products |
| ZG11 | 89 | 11 | 14.3-14.7 | 2800 | 88.5 | 1.2-1.6 | Anti-wear, anti-erosion, good comprehensive mechanical strength,
suitable for wear-resistant parts in the petroleum, chemical and
mechanical industries. |
| ZG12X | 88 | 12 | 14.2-14.5 | 3000 | 89.5 | 1.0-1.2 | Anti-erosion, good comprehensive mechanical strength, suitable for
impact-resistant wear-resistant parts, molds, and roller rings. |
| ZG15 | 85 | 15 | 13.8-14.2 | 3000 | 86.5 | 1.2-1.6 |
| ZG15X | 85 | 15 | 13.8-14.2 | 4500 | 89.0 | 0.7 | Excellent wear resistance and toughness,it is suitable for making
integral stamping dies, anti-vibration toolholders, etc. |
| ZG20 | 80 | 20 | 13.4-13.8 | 3100 | 85.0 | 1.0 | Excellent wear resistance and toughness |
| ZN06 | 94 | 6 | 14.5-14.9 | 2000 | 90.0 | 1.2 | Non-magnetic alloy, suitable for sealing ring, non-magnetic
wear-resistant parts and corrosion-resistant parts. |
| ZN09 | 91 | 9 | 14.3-14.6 | 2300 | 89.0 | 1.2-1.6 |
| ZN11 | 89 | 11 | 14.0-14.3 | 2600 | 88.0 | 1.2 |
Products show
