Home > Tungsten Carbide Wear Parts >

Preservative Cemented Carbide Wear Parts For MWD

Product Categories

Tungsten Carbide Nozzle [47]
Drill Bit Nozzle [21]
Tungsten Carbide Wear Parts [145]
Threaded Nozzle [27]
TC Bearing [44]
PDC Bearing [38]
Tungsten Carbide Sleeve [47]
Valve Spare Parts [77]
Tungsten Carbide Sandblasting Nozzle [10]
Control Valve Components [80]
MWD Parts [86]
Choke Stem [30]
Carbide Wear Parts [11]

Zhuzhou Zonco Sinotech Wear-resistant Material Co., Ltd.

Contact Now

Preservative Cemented Carbide Wear Parts For MWD

Ask Lasest Price
Brand Name :	ZONCO
Model Number :	Customized
Certification :	ISO9001:2015
Price :	negotiable
Payment Terms :	L/C, T/T,
Supply Ability :	10000 piece/pieces per month
Delivery Time :	30-35 working days

Add to Cart

Product Details
Company Profile

Preservative Cemented Carbide Wear Parts For MWD

Various Cemented Carbide Precision Wear Parts For MWD Carbide Rotor And Stator

Product detail

The rotor of the continuous wave pulse generator is equipped with a stator with the same number of blades as the rotor.When the rotor crosses the cross section of the rotor and the relative position of the overcurrent section of the stator,a continuous sinusoidal pressure wave is generated,which is encoded by the downhole probe.The measurement data is loaded by the modulation system,the change of the pressure waveform is detected on the ground and the measurement data is calculated by decoding.

Working Principle

The inclinometer pulse generator is inserted into the current limiting ring through the control(mushroom head) gap to change the annulus cross-sectional area therebetween. The mud pressure flowing in the drill pipe is changed to form a positive mud pressure pulse to realize signal transmission.The mud pressure flowing in the drill pipe is changed to form a positive mud pressure pulse to realize signal transmission.The pulse generator is driven by an electromagnetic mechanism to control a small control valve,thereby changing the pressure contrast of the upper and lower end faces of the piston. Then use the pressure generated by the mud flow to push the piston up and down and the lifting rod(mushroom head) is intermittently inserted into the restrictor ring to form a positive mud pressure pulse.

Products show

Common tungsten carbide grades

Common Alloy Grades, Ghysical Mechanical Properties And Recommended Application
Grade	WC%	Co/Ni %	Physical and mechanical properties			Grain size (μm)	Recommended application
Grade	WC%	Co/Ni %	Density (g/cm3)	TRS (N/mm²)	Hardness (HRA)	Grain size (μm)	Recommended application
ZG01	100	0	15.3-15.5	1200	95.5	0.3	Ultra-high hardness, high wear resistance, anti-corrosion, with certain anti-destructive ability
ZG04X	96	4	15.0-15.2	1600	92.8	0.8-1.0	Suitable for drawing die, non-ferrous metal wire drawing and wear-resistant parts
ZG06	94	6	14.8-15.1	2500	90.0	1.2	Good abrasion resistance, good compression resistance, suitable for wear-resistant parts that resist abrasion and high pressure.
ZG06X	94	6	14.8-15.1	2400	91.5	1.0	Superio wear resistance,good comprehensive properties,suitable for making non-standard structure components with higher wear resistance.
ZG06A	94	6	14.8-15.1	2150	92.5	0.6-0.8
ZG08	92	8	14.6-14.9	2700	89.0	1.2-1.6	Good general performance, used for general wear parts, molds, general tools, etc.
ZG10.2	90	10	14.3-14.6	3800	91.7	0.7	Good general performance, suitable for casing and oil nozzle products
ZG11	89	11	14.3-14.7	2800	88.5	1.2-1.6	Anti-wear, anti-erosion, good comprehensive mechanical strength, suitable for wear-resistant parts in the petroleum, chemical and mechanical industries.
ZG12X	88	12	14.2-14.5	3000	89.5	1.0-1.2	Anti-erosion, good comprehensive mechanical strength, suitable for impact-resistant wear-resistant parts, molds, and roller rings.
ZG15	85	15	13.8-14.2	3000	86.5	1.2-1.6
ZG15X	85	15	13.8-14.2	4500	89.0	0.7	Excellent wear resistance and toughness,it is suitable for making integral stamping dies, anti-vibration toolholders, etc.
ZG20	80	20	13.4-13.8	3100	85.0	1.0	Excellent wear resistance and toughness
ZN06	94	6	14.5-14.9	2000	90.0	1.2	Non-magnetic alloy, suitable for sealing ring, non-magnetic wear-resistant parts and corrosion-resistant parts.
ZN09	91	9	14.3-14.6	2300	89.0	1.2-1.6
ZN11	89	11	14.0-14.3	2600	88.0	1.2

Product Tags:


*From:	Your email address is incorrect!
*To:	Zhuzhou Zonco Sinotech Wear-resistant Material Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!